To re-flash a Cardshark device, take the following actions:
- Commissioning Tool & APX Mode: Ensure the unit is powered on with the commissioning tool in place, which puts the Cardshark into APX mode. See proper use of the commissioning tool here: Commissioning Tool Placement
- Verification: Run lsusb on the host computer to confirm that the unit is in APX mode.
- Re-flashing: If necessary, re-flash the device using the jetpack-flash.sh script provided in the Jetpack-Tools repository.
Get access to Jetpack-Tools here: Getting Started With Jetpack-Tools
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article