Verify Boot Status
- Connection Check: Connect your Cardshark to the host computer using the appropriate USB-A cable (USB-A to Nett Warrior) on the Host Port.
- USB Detection: On the host computer, run the following command to ensure the Cardshark is recognized: lsusb
Verify that the Cardshark appears in the list of connected USB devices.
Check Boot Messages
- Display Connection: Attach a display cable to the PAN+ Display Port.
- Monitor Boot Process: Power on the Cardshark and observe the boot messages on the connected display. This helps identify any errors during startup.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article